 |
|||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
 |
 |
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
| Model stitcher with arm Cucitrici filo metallico cartone ondulato - Wire stitching machines cardboard |
;)
|
|
- Wire stitcher with arm - Arm 1300 mm - 1600 mm - 1800 mm - Optional: Table and shoe |
|
| |
|
 |
|
| Model XA Cucitrici filo metallico cartone ondulato - Wire stitching machines cardboard |
;)
|
|
- Manual stitcher with fixed head for carton "Tri Wall" - Maximum lenght leg of the staple 32 mm - Working width from 3000 to 4000 mm |
|
| |
|
|
|
| Model XC/32 Cucitrici filo metallico cartone ondulato - Wire stitching machines cardboard |
;)
;)
|
|
- Semiautomatic stitcher, twin heads for two half boxes "Tri wall" - The stutching machine Mod. XC 32 is used principally to stich corrugated carton boxes made by two half boxes joined by two wire stitchs or two hot gluers. - The machine is therefore supplied with two stitcher heads AX 32 that can stitch corrugated carton from 5 mm to 32 mm of thickness at the speedness of 330 stitchs per minute. - The machines is produced with four different width for maximum sheet of 3000 mm, 3600mm, 4000mm, 4400mm. So that it lets to produce the boxes having a total widt double of the above mentioned sizes. Speed of the head n. stitches / min. 330 Minimum thickness of the board mm. 5 Maximum thickness of the board mm. 32 Working width 3000 - 3600 - 4000 - 4400 |
|
| |
|
|
|
| Model S.A. 3000 Cucitrici filo metallico cartone ondulato - Wire stitching machines cardboard |
;)
|
|
Stitches at a minimum of 1’N. 450 Width of stitch mm. 16 Maximum stitch thickness mm. 20 Inclination of head 45° Possibility of double stitch at the beginning and at the end of the box Possibility of giving one stitch at the beginning , one in the centre and one at the end of the box( in the case of simultaneous stitching, sticking) Maximum numer of stitches per cycle 99 |
|
| |
|
|
|
| Model SA 2002 Cucitrici filo metallico cartone ondulato - Wire stitching machines cardboard |
;)
|
|
- Semiautomatic stitcher whit oscillating head and or gluer - Working width 2200 - 700 stitch per minute |
|
| |
|
|
|